Converts 12V battery power to clean 120V household AC. Pure sine wave is safe for sensitive electronics—fridges, microwaves, laptops, tools, and medical devices—without the buzz or extra heat of modified sine units.

3500W continuous / 7000W surge. Four AC outlets plus USB (QC 3.0 18W). LCD shows input/output voltage, frequency, load, battery status, and waveform. Wired remote with 9.8 ft cable. Aluminum housing and smart fans (on at ~113°F / 45°C).

Typical specs
Input 12V DC (9.5–15.5V) • Output 120V AC ±5%, 60 Hz • THD ≤3% • Efficiency ≥88% • No-load draw <0.8A • Low-voltage alarm ~10.5V / shutdown ~9.5V • Over-voltage shutdown ~15.5V

In the box
Inverter • remote + cable • battery cables • spare fuses • mounting screws • manual

Warranty
12-month manufacturer warranty against defects in materials and workmanship. Seller return policy applies as stated at checkout.

Safety
This unit can draw well over 250A at full load. Use only the supplied (or equal/heavier) cables, a correctly sized 12V battery bank, and a proper fuse or breaker on the positive lead, close to the battery. Observe polarity—reverse connection can blow fuses and damage the inverter. Install in a dry, ventilated space; do not cover fans or enclose the unit. Do not exceed continuous rating; motors and compressors need headroom for surge. Not a UPS or grid-tie inverter. Keep away from children. If you are unsure about wiring, battery sizing, or vehicle/RV electrical codes, use a qualified installer.